Work on the Q3 Charge Accelerator pulse motor section continues. Read the full article here: http://www.thedoityourselfworld.com/articles/article.php?id=11406
I finished assembling the electronics section of the pulse motor which holds the bridge rectifiers and the solid state relays.
Then I finished soldering the wires on the second stator half of the pulse motor.
While soldering I also used heat shrink tubing to protect the exposed wire ends and solder joints. I used the heat from my soldering iron to shrink the tubing carefully.
After soldering I wiped all the parts with a micro fiber cloth to remove any dirt and fingerprints.
Next I put the shaft back into the motor half and assembled the magnet timing wheels.
I also put the framing bolts together and slipped a stator half onto the frame.
The pulse motor section of the Quanta Magnetics Q3 charge accelerator is starting to look very good now.
Thanks for watching. Please Subscribe & follow my daily videos.
Note: Copying this video, in part or in full, is a violation of copyright unless the user has express permission from the owner. Violation of this copyright will be pursued to the fullest extent of the law.
WOW...Looks fantastic. I know it is a high end item but still the machine work is excellent. Alignment is very precise. Take your time and you should be good to go when it is finished. Not saying it is going to work, just saying that mechanically and electrically there should be no problems.
My heavens Where Is your latex gloves. Keeps all greasy fingerprints off everything involving the build. A real kit would have all prewound coils and soldered assemblies. This is a real from scratch build. Check for Troy' s hair loss video next. I am a electronic technician please put black electric tape over your wedding ring. Otherwise we will be entertained with the light show.
had to put my solar batteries on an actual battery charger for the first time ever since i got into solar system from watching you all these years...the most bla grey lousy wet winter ever...and still no sun forecast in the next 2 weeks to come...if that Q3 thing was only a few hundred bucks we would all be buying one due to this crappy winter !!
keep on with the project...glad your doing 2 diff videos
question Troy...do the components of this device look like basic off the shelf electronics or are these very special private design relays and ..well whatever the pieces are....
what im wondering if you get this one working could you buy all the stuff online cheap and make your own plastic forms to hold everything together and in place ?
one time my dad worked all the time when he and my mom were young. He came home a built balsa wood air plans for fun. Big nice ones and my mom felt like he was ignoring her so when he came home from work one day he found that my mom had smashed them all LOL =) So spend more time with your wife or they do get more pissed than you know about. LOL They dont like it if they feel your ignoring them. =0
Cool project! I bet that the large coils and magnets do pulse charge the heck out of a battery. Show everyone the water what it looks like after it start desulfating it turns murky gray from the desulfation that is blown of the plates.
Spend a little less time working and more time playing cards or board games with your wife and hug and kiss and tell her you love her many times a day. My wife likes to play board games with me or friends.
It Looks like it is really coming together Troy.
Do you plan on using this to try to restore the Fork Lift batteries?
Would they serve as a good backup battery bank or could you tie it in to your current bank to boost the amperage?
Brokerage fee amount by transaction value 1.
Trade online and settle your trade to a CDIA or CommSec Margin Loan 2.
Trade online and settle into a bank account of your choice.
Share Trades over the Phone 3.
CommSec Share Packs online 4.
CommSec Share Packs over the phone 4.
Trades requiring settlement through a third party 6.
1 For GST rounding reasons, the final brokerage fee may vary from the stated or expected brokerage fee by a couple of cents.
4 Normal brokerage will apply when a stock acquired through CommSec Share Packs is subsequently sold.
5 Amount per share will be noted as brokerage on each confirmation issued. There will be no substitution should a stock have a trading halt placed on it.
6 Includes third party Margin Lending, and where the Commonwealth Bank exercises its rights under the loan Terms and Conditions.
Other fees may apply. Please see the CommSec Financial Services Guide.
Open a CommSec Share Trading Account.
Buy and sell shares using a CommSec Share Trading Account with our cash account - with it you can seamlessly settle trades, transact and earn interest.
Buy and sell shares using a CommSec Share Trading Account with your existing bank account.
Frequently asked questions.
Shares held with another broker.
For the transfer to be successful the name and address registered on your issuer holdings must match your CommSec account.
Your request will be completed within 72 hours.
Shares held with the share registry To transfer shares held with the share registry into your CommSec Trading Account you need to complete an Issuer Sponsored Holdings to CHESS Sponsorship Transfer Form.
Your request will be completed within approximately 48 to 72 hours of receipt.
When you have bought and sold shares on the same day and the next trading day, your payment may be partially or wholly offset. For more information refer to the New Client Guide.