HomeНаука и техникаRelated VideosMore From: GalcoTV

How to Wire Up an ABB ACS150 Drive

424 ratings | 92076 views
How to Wire Up an ABB ACS150 Drive presented by Katie Nyberg for Galco TV. Buy the items featured in this video at 800-337-1720 or visit: http://www.galco.com/shop/ACS150-ABB-AC-Drives?source=YouTubeHowTo Sign up for Galco’s newsletter that features our newest products, our can't-miss deals, our best videos, and total access to Galco’s electronics expertise: http://www.galco.com/email/ Connect with us! https://plus.google.com/+GalcoIndustrial https://www.facebook.com/GalcoIndustrial https://twitter.com/GalcoIndustrial https://www.linkedin.com/company/galco-industrial-electronics Don't forget to like and comment on this video, and subscribe to our channel! The ACS150 provides additional capability and range to support small AC induction motor and machinery applications. The acs150 has an easy to use operator interface and is simple to set up, configure, and apply. ABB component drives meet the requirements of OEMs, system integrators and panel builders. The drive is ideal for food and beverage, material handling, rubber and plastics, and woodworking applications. Features of the ABB ACS150: - General Purpose - Volts/Hertz Control - 0.5 to 3hp 240V, to 5hp 480V - 1 & 3-Phase Units - Protected Chassis (IP 20) Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical & Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control & Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits & Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers & Test Stand Applications. Visit us online at http:// www.galco.com or call us at 800-337-1720. http://www.galco.com/safety With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician. GTV, Galco, galco.com, Galco Industrial Electronics, and Galco Industrial Electronics, Inc. are registered and/or pending registered trademarks under the U.S. Patent and Trademark Office, assumed names, registered domain names, and/or trade names of Galco Industrial Electronics, Inc., a Michigan corporation. LEGAL DISCLAIMER: While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Galco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Galco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.
Html code for embedding videos on your blog
Text Comments (73)
Cheick Dembele (22 days ago)
Hi i'm a i want to ask you What's the definition of GND ?
Carlos h Gonzalez (5 days ago)
Tipu Sultan (1 month ago)
very good explanation
Muhammad Awais (1 month ago)
hi thier was any job in uae on goloco service center
GalcoTV (1 month ago)
Not sure what you are asking, can you ask a different way?
Hasif Ariff (3 months ago)
Hi.i have this installation for small motor.it uses 1-phase incoming supply and outgoing 3- phase.How does it happen?Is there any transformer intergrated in this ACS 150?
Conserv Tab0008 (4 months ago)
Am I at Disney world
Maicon Ribeiro Borges09 (5 months ago)
muito bom
Asfand yar khan (6 months ago)
What is digital input & analog input plz mention. thanks
Asfand yar khan (3 months ago)
+Sirc Manaloto thanks
Sirc Manaloto (3 months ago)
digital input is the contact from relay or switch, analog input is either voltage or current which comes from sensors analog outpur or other devices has analog output..
Mohd Nazim (7 months ago)
I very much like this vedio WhatsApp +919458547118 give me your no. Miss Katie if I need in future then I will cantact
GalcoTV (7 months ago)
You can reach any of our engineers or product managers at 800-337-1720
Sunil Lohani (9 months ago)
Please help me for overcoming the error -F0035 in ACS 150
GalcoTV (8 months ago)
Then it is most likely the drive itself has failed.
Sunil Lohani (8 months ago)
I check voltage between each phase and ground. This is OK. And also disconnect motor wires but error is coming continuously.
GalcoTV (8 months ago)
Did you measure each phase to ground? If so and the voltage to ground is equal, the drive may be faulty and need repair.
Sunil Lohani (9 months ago)
Input power supply OK
GalcoTV (9 months ago)
Please reference the terminal numbers
ajay rawat (10 months ago)
Hello Katie. Could you please tell me how to synchronise two motor?
GalcoTV (10 months ago)
No problem ajay
ajay rawat (10 months ago)
Thanku Katie....lots of respect from india....I will keep asking questions,hope you will support.
GalcoTV (10 months ago)
This is probably a question for our engineering department, but yes you can run both same rated motors off of a single drive. However, you MUST add the horsepower of the 2 motors for total power of the drive. In other words, (2) 5HP motors will require at least a 10HP drive, ok? Also you will need to provide separate OL relays for each motor.
ajay rawat (10 months ago)
Question 3: can we run two same rated motor by single drive.if YES ,how?If NO,why?
ajay rawat (10 months ago)
Let 's ignore duty of drive.we have 75 hp motor ,so in terms of Kw rating what should be drive rating?
Pluspoint (1 year ago)
please make video about flowneter setting
Pluspoint (1 year ago)
GalcoTV (1 year ago)
Welcome, glad you liked it
When I press reverse pushbutton its shows REV on the acp and I get 24v on DI2 but the motor doesn't run in reverse direction. Any solutions please?
Kevin O. McCann (1 year ago)
What does U and I stand for on the input switch?
GalcoTV (1 year ago)
The U stands for voltage input (0-10volt input), and the I makes it a current input (0-20ma).
chihi AAymen (1 year ago)
Comment brancher et programmer une bouton RST externe op Mercie d'avance
GalcoTV (1 year ago)
Avez-vous une copie du manuel?
chihi AAymen (1 year ago)
Pour un variateur abb acs 150
Malek Rizwan (1 year ago)
blachfordm (1 year ago)
Where does Katie connect the +24V Source to in her setup? Trying to wire up the ABB ACS150 for a momentary contact paddle switch.
GalcoTV (1 year ago)
5th terminal from left should be the +24volt output but you will also need a jumper from com to gnd so you can use the internal 24volt supply for your inputs.
Electrical hub (1 year ago)
i had installed pot but it is not controling, which parameter should i change that speed could be controled by pot and i am using acs5050-01-045a-4
GalcoTV (1 year ago)
Ok if you have keypad ACS-CP-A first make sure you have the "REM" symbol in the upper left corner of the display, (remote mode) if not simply push the LOC/REM button to put back into remote mode of operation. If still doesn't work you may have to default the drive.
Electrical hub (1 year ago)
yes it is acs550. i had downloded its user manual from abb website.It was running on remote mode by using speed pot but person who was handling this drive before me had done something to it and now pot is not working some parameters are also missing i can only change rpm by drive keypad prameter 11 ,1105. please help
GalcoTV (1 year ago)
Ahh well let me assume that you mean the ACS550, because there is no such drive as ACS5050, ok? The drive defaults to the Analog input 1 or AI1 at X1 terminals 2, 3, and 4. Do you have a copy of the User manual for this dirve?
Farhan Ali (1 year ago)
very nice
Mamun Mahmud (2 months ago)
GalcoTV (1 year ago)
dehyaa Sultan (2 years ago)
thanks for this video
shrikant kale (2 years ago)
hello Katie i am not able to start this drive,is it necessary to connect AI I have connected 3 phase mains & motor connection but drive not starting
Cristito Jimenez (1 year ago)
good luck
shrikant kale (2 years ago)
yes sure
GalcoTV (2 years ago)
Hey Shrikant, If our instructions end up not working, there may be a chance that the drive is defective since the display is lighting up but not actually showing anything. Keep us updated!
GalcoTV (2 years ago)
You're welcome, we hope you can get it working!
shrikant kale (2 years ago)
yes thank u & I'll try it tomorrow
Ash Kirkwood (2 years ago)
Is this machine suitable for a 5 pin UK 3 phase plug? 3 Phase + N + E.
GalcoTV (2 years ago)
Yes this drive can be used in the UK, it meets all US, UK and European stardardsWe suggest connecting the Neutral and Earth ground wires together at the drives chassis ground terminals. Connect the line phases L1, L2 and L3 to U1, V1 and W1 terminals on the drive only. There is also an EMC filter built into the drive, depending on your particular power feed system, you may want to change the plastic screw to metal screw to connect the EMC filter and make it active. Hope this helps.
Grover Yerson (2 years ago)
nice video
Eric Platzke (3 years ago)
Good video!
Shaker Saleh (3 years ago)
Thanks for the show, and keep these tutorials coming

Would you like to comment?

Join YouTube for a free account, or sign in if you are already a member.